how do I access shared files?
djcc-87.htm[28/10/2014 15:48:55]
to view the IP address information directly from the system as described
below.
Contact your system's administrator for the IP address information If
you are prompted for the administrative password and do not know it.
1. Select the Setup Tab
2. Select Options > System > Advanced button
3. Enter the administrative password if prompted.
4. Press the Network Settings button to view the IP address
information
Administrators - See "How do I make network settings
" for details on
how to protect the system from network access by setting a login and
password
NOTE: You can also access shared files through FTP protocol. For this
you will need the same information as stated above - i.e., the IP address
of your HP Designjet scanner and the login and password for
FTP/WebDAV access if protection was applied. You will also need a FTP
client program.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
