how do I optimize color accuracy?
djcc-102.htm[28/10/2014 15:45:08]
you are here: welcome how do I...? optimize color accuracy
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
how do I optimize color accuracy?
Follow the guidelines below to ensure color accuracy.
guidelines..
1. Make sure your scanner's glass plate and white background
platen/white rollers are clean and you have recently performed
scanner maintenance including cleaning and calibration. View
the Calibrate Instructions.
2. Make sure your scanner has warmed up for at least one hour
before copying - apply only for the HP Designjet HD Pro
Scanner.
3. Do you have a media profile for the specific media type that is in
the printer? If not, you will need to create a new media profile.
View the media profile creation instructions
.
4. Have you selected for the job the media profile that was created
for the specific media in the printer? If not you have to select it
through the Copy tab>Media Profile.
View the media profile selection instructions.
5. Are you copying an original that was printed with this system or
on another inkjet printer? If yes, than you must select the "Ink
Printer Original" option in the Copy tab>Settings dialog or the
Print tab > Settings dialog.
View instructions for making output quality settings.
6. Are you copying a color map and some of the colors in the copy
appear as gray? Make sure the "Enhance Gray" option under the
type of original template is not selected. Copy tab>Type of
original>Tool button>More>Enhance Gray
See also: ...to define an original template...
To Next Page
Loading...
