how do I set the input size?
djcc-9.htm[28/10/2014 15:45:12]
4. To set the input size you can:
Specify the width and length. The original's width can be read
off the ruler at the scanner's insertion slot.
Select Auto Width and/or Auto Length to let the scanner detect
the physical input width and/or length of the inserted
document.
Press the dialog's Input size button to display the list of
available sizes.
Both Auto Width and Auto Length can be applied for total input size
detection. Automatic size detection works through a prescan of the
original and copying thus requires more time than with manual size
settings.
5. Press OK to return to the main (Copy or Scan) settings.
You can also save your settings i a new Size Preset. See how do I
create a custom paper size.
You can also use a scale factor to determine the output size. See:
...how do I set a scaling factor
See also:
...how do I set the output size?
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
