how do I set the output size?
djcc-10.htm[28/10/2014 15:45:13]
You can create custom sizes and save them as presets. You can
specify the Output size by setting the Width and Length. Press
the tool button to open the Output size setup dialog.
Note: When you select Auto for the Input Size and a specific
Output Size, the Scale value will be set to Auto until the first
preview after which the calculated Scale value percentage will
be displayed. Input/Output sizes can also be set through the
scale factor.
4. Press OK to return to the Copy tab.
You can also use a scale factor to determine the output size. See:
...setting a scale factor
See also:
...how do I set the input size?
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
