how do I scan to FTP server
djcc-99a.htm[28/10/2014 15:47:22]
7. Password - the login password for the FTP server.
8. Label – this is what your HP Designjet scanner system will
display in its browse dialogs. Enter a name that will help you
identify the FTP destination.
Remove FTP connections : You remove FTP connections through
the Folder button > Network > "Remove Network/FTP
Connection".
To scan to the FTP server
1. Complete the steps above under “To add an FTP connection”.
2. Select the Scan tab and make your settings as with any scan-
to-file job.
3. Press the "File destination" button.
4. Press the path up (“..”) button until it disappears meaning you
reached the list’s topmost level which is the list of accessible
drives.
5. Navigate the list until you see your FTP location i.e. the Label
you entered in step 8 under "to add an FTP connection" above.
6. Select the FTP destination.
7. Press OK when you have highlighted the destination folder you
want to use.
NOTE: All scans will be saved directly in the FTP server (or subfolder)
you have specified while creating the FTP connection.
You cannot perform file management tasks on the FTP connections
(deleting files, creating subfolders, etc.).
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
