how do I use paneling?
djcc-22.htm[28/10/2014 15:47:32]
you are here: welcome how do I...? use paneling
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
how do I use paneling?
to use paneling..
1. Select the Setup tab.
2. Select the Layout button to reach the Layout dialog.
3. Select the Paneling option.
4. Make your paneling settings. Select the tiling option when you
want to determine the length of each section and assemble
multiple short sections vertically instead of connecting long
whole image length sections. See tell me about paneling
options for instructions on all the settings.
5. Set your large Output size in the Copy tab. Your Output size
value is set to the size you want for the end result: that is, the
size of the total image after the panels are assembled.
6. Make your Copy tab and Setup tab settings (such as Type of
original, Input/Output Size, Margins, Number of copies, Media
profile) as with normal copies.
7. Press the Copy button (Print button when printing from file) to
output your panels.
NOTE: Your Margins setting in the Setup tab will apply for the whole
image after you connect the panels and not for each individual panel.
Paneling can be used with both Scan-to-print copying and with Print-
from-file copying through the Print tab.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
