how do I - output margins?
djcc-107.htm[28/10/2014 15:47:35]
...how do I use Outer margins?
"Outer Margins" are for adding white border to the edges of the copy
while leaving the scan area intact.
1. Select the Setup tab.
2. In the Setup dialog, press the Margins button. The Margins
dialog is displayed:
3. Press the Outer Margins button.
4. Set the Top, Bottom, Left and Right margins in the Outer Margin
dialog.
5. Use the "Link" option if you want equal Outer margins all around
the image. With the Link option checked, you only have to enter
the Outer margin value in one of the four fields.
6. Most printers cannot start printing at the very edges of the
paper and thus enforce a margin on your output. You can
choose to account for this enforced margin by enabling the
Margin dialog's "Clip contents by printer's margins" option.
Read more about the "Clip contents by printer's margins"
option.
7. Check the Print Paper Border option to get a thin black line
around the new output size boundaries. With wide format
printing on large printer rolls, this option will give you a clear
cutting line so you end with precisely the output size you
defined.
...Examples of using Margins and Outer Margins
Example1:
To Next Page
Loading...
