7 Connectivity
• USB Connection (non-network connection)
•
Connect a new printer
USB Connection (non-network connection)
The HP Deskjet 2510 supports a rear USB 2.0 High Speed port for connection to a computer.
To connect the product with the USB cable
▲ Refer to the setup instructions that came with your product for information on connecting to a computer with a
USB cable.
NOTE: Do not connect the USB cable to the product until you are prompted to do so.
If the printer software has been installed, the printer will operate as a plug and play device. If the software has not
been installed, insert the CD that came with the device and follow the onscreen instructions.
Connect a new printer
Refer to the below instructions for connecting a printer to the computer, which has the software installed but not
connected to the printer.
Connect a new printer
1. From the computer’s start menu select All Programs or Programs, and then select HP.
2. Select HP Deskjet 2510 All-in-One series.
3. Select Printer Setup & Software.
4. Select Connect a new printer. Follow the onscreen instructions.
Connectivity 29
To Next Page
Loading...