Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
• When setting up the wireless networked printer, make sure your wireless router or
access point is powered on. The printer searches for wireless routers, then lists the
detected network names on the computer.
• If your computer is connected to a Virtual Private Network (VPN), you need to
disconnect from the VPN before you can access any other device on your network.,
including the printer.
• Learn how to find your network security settings.
Click here to go online for more
information.
• Learn about the Network Diagnostic Utility and other troubleshooting tips.
Click here
to go online for more information.
• Learn how to change from a USB to wireless connection.
Click here to go online for
more information.
• Learn how to work with your firewall and anti-virus programs during printer setup.
Click here to go online for more information.
Tips for setting up and using a networked printer 37
Connectivity
To Next Page
Loading...
