Sleep mode
●
Power usage is reduced while in Sleep mode.
●
After initial setup of printer, the printer will enter Sleep mode after 5 minutes of inactivity.
●
The Power button light is dimmed and the printer control panel display is off in Sleep mode.
To change the time to Sleep mode
1. Open the embedded web server (EWS). For more information, see
Open the embedded web server
on page 77.
2. Click the Settings tab.
3. In the Power Management section, click Energy Save Mode, and select the desired option.
4. Click Apply.
26 Chapter 2 Get started ENWW
To Next Page
Loading...