HP Deskjet 450 series - Page 15

12
7. Choose one of the following options and then click
Next.
• No: By default your printer is set to No encryption.
• Yes: You will be prompted for a code which must match the PIN code
assigned to the hp deskjet 450 printer. By default the PIN code is 0.
8. Click the
Printing (HCRP) check box, then click Next.
9. Click
Finish.
The hp deskjet 450 series printer icon appears in the list of devices. If you do
not see the icon appear in the list, see the troubleshooting entry printer is
connected to computer but will not print or did not appear on page 43.
The authentication settings must match the settings on your
hp deskjet 450 series printer. If you choose
No, and you have
already used the hp deskjet 450 toolbox to change the printer's
Encryption Required setting, you will not be able to print. You can
reset to factory defaults (see reset to factory defaults
on page 58).
For more information on changing the printer's wireless features
see changing the printer’s wireless feature
on page 53.