13
verify the printer connection
To verify the printer is successfully communicating with the computer:
1. Set the new HCRP-enabled printer as your default printer.
When you choose the Print command in many Windows-based programs,
the default printer is used unless you specify otherwise. To set your
default printer, do the following:
a. Click
Start > Printers and Faxes.
b. Right-click the icon for the printer you want to use as the default printer,
and then click
Set As Default Printer.
c. If there is a check mark next to the icon, the printer is set as the
default printer.
2. Open an existing document.
3. Choose
File > Print.
To Next Page
Loading...