6
HP Deskjet 6980 Series Setup Guide
English
Follow these steps to set up a wireless network connection using SecureEasySetup:
1. Push the SecureEasySetup button on the router/access point.
2. Lift the cover of the printer, and then push the SecureEasySetup button on the
printer.
The network name, or “Service Set Identifier (SSID)” is now set and Wi-Fi Protected
Access (WPA) security is activated.
3. Close the printer cover.
4. Insert the printer software CD in the computer CD-ROM, and then follow the
onscreen instructions.
5. On the Connection Type screen, select Wireless, and then click Next.
6. Follow the onscreen instructions to complete the software installation.
The SecureEasySetup connection is successful when both the Wireless Status light and
the Network light on the printer front panel transition from blinking to ON.
If you have additional computers on your network that will use the printer, follow the
instructions on page 12 to install the printer software on each computer.
A1
Wireless: SecureEasySetup
To Next Page
Loading...