English
HP Deskjet 6980 Series Setup Guide
11
English
1. Use an Ethernet cable to connect the printer to the network hub, switch, or router.
Note: A network cable and a USB cable cannot be used at the same time.
2. Verify that the Network icon is on. If not, check the cable connections.
3. Insert the printer software CD in the computer CD-ROM drive, and then follow the
onscreen instructions.
Go to page 12 to set up additional computers.
Go to page 12 to set up additional computers
1. Connect the printer to the computer with the USB cable. Wait for a Wizard
screen.
2. Insert the printer software CD in the computer CD-ROM drive, and then follow the
onscreen instructions.
Section C. USB connection
Windows XP: During installation,
when prompted, select
hpfipna.inf.
Section B. Ethernet (wired) network
Zazu_setup_guide_base_duplexer_2ndtray.fm Page 11 Tuesday, November 1, 2005 11:17 AM
To Next Page
Loading...