● Do not exceed the In-tray capacity: 20 sheets.
Prepare to print
1. Verify that the printer is turned on.
2. Remove the Out tray, and then remove all paper from the In tray.
3. Slide the paper width-guide all the way to the left, and then pull out the paper-length
guide.
4. Place the banner paper in the In tray so that the unattached edge is on top of the
paper stack and pointing toward the printer.
1 Unattached edge
5. Slide the paper-width guide firmly against the paper.
Note Leave the Out tray off of the printer when printing a banner.
Print
1. Open the Printer Properties dialog box.
2. Click the Paper/Quality tab, and then specify the following print settings:
– Size is: Letter or A4
– Source is: Upper tray
– Type is: HP Banner Paper
3. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that you see in the Printer
Properties dialog box.
CD/DVD tattoos
User's guide 87
To Next Page
Loading...