42
Printing Cards
Use your printer to print on index cards, recipe cards,
greeting cards, business cards, or postcards—or any card size
included in the Paper Size list on the Setup tab. You can print
on other sized cards, too. If the dimensions of your card aren’t
the same as those shown in the Paper Size list, see “How to print
on different paper sizes” on page 34.
1 In the HP print settings box, click the Setup tab, and then
select a card in the Paper Size drop-down box. (See “Finding
the HP print settings box” on page 30.)
2 Slide out the IN tray, slide out the paper adjusters, and flip
up the OUT tray.
3 Load a stack of up to 30 cards ( 6 mm or 1/4 inch) in the IN
tray.
Make sure the orientation of the cards matches the
orientation you’ve selected in your software program.
4 Slide the paper-width adjuster to the right until it fits snugly
against the cards. If the cards are too small to be held
securely by the paper-length adjuster, push the small slider
until it fits snugly against the edge of the stack.
5 Push in the IN tray and flip down the OUT tray.
6 Print the cards.
After printing, remember to:
• Change the Paper Type and Paper Size in the HP print
settings box to match whatever you’ll be printing on next.
• Remove any cards from the IN tray and replace them with
whatever paper you’ll be printing on next.
Small
slider
To Next Page
Loading...