Tips for copy and scan success
Use the following tips to copy and scan successfully:
●
Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as
part of the image.
●
Load your original, print side down, on the right front corner of the glass.
●
To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.
●
To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the
software.
38 Chapter 4 Copy and scan ENWW
To Next Page
Loading...