HP Deskjet F300 User Manual

Tout-en-un HP Deskjet série F300
3
2
1
a.
b.
*Q8130-90207*
Q8130-90207
*Q8130-90207*
4
*
*Purchased separately.
* Se adquieren por separado.
* Acheté séparément.
ES
EN
FR
ES
EN
FR
ES
EN
FR
ES
EN
FR
EN FR
ES
AVERTISSEMENT : Pour garantir une installation correcte du logiciel, ne
connectez pas le câble USB avant l’étape 14.
Abaissez le bac d’alimentation du papier et ouvrez la porte d’accès
aux cartouches d’impression.
IMPORTANT : Retirez tout matériel d’emballage du périphérique.
Vérifiez le contenu du coffret.
Le contenu du coffret peut varier.
Connectez le cordon d’alimentation et l’adaptateur.
Commencez ici
Comience aquí
ATENCIÓN: Para asegurarse de que el software se ha instalado
correctamente, no conecte el cable USB hasta el paso 14.
Baje la puerta del papel y del cartucho de impresión.
IMPORTANTE: Extraiga todo el material de embalaje del dispositivo.
Compruebe el contenido de la caja.
El contenido de la caja puede ser distinto.
Conecte el cable de alimentación y el adaptador.
Start Here
Lower both the paper and the print cartridge door.
IMPORTANT: Remove all packing material from the device.
Verify the box contents.
The contents of your box may differ.
WARNING: To ensure that the software is installed correctly, do not
connect the USB cable until step 14.
Connect the power cord and adapter.
HP Deskjet F300 All-in-One series
User Guide

HP Deskjet F300 Specifications

General

Print Technology	Inkjet
Functions	Print, Scan, Copy
Print Speed Black	Up to 20 ppm
Scanner Type	Flatbed
Copy Speed Black	Up to 20 cpm
Scan Resolution	Up to 1200 dpi
Connectivity	USB 2.0
Operating Systems Supported	Mac
Media Sizes Supported	Letter, legal, envelopes
Print Resolution	Up to 4800 x 1200 dpi

Summary

Getting Started and Initial Setup

Step 1: USB Connection Warning

Do not connect the USB cable until step 14 for correct software installation.

Step 2: Remove Packing Material

Lower paper and cartridge doors, then remove all packing material from the device.

Step 3: Verify Box Contents

Check the contents of your box; note that contents may differ or be purchased separately.

Step 4: Connect Power Cord and Adapter

Connect the device's power cord and adapter to begin setup.

Step 5: Load Paper

Load plain white paper into the tray, being careful not to force it too far.

Step 6: Power On Device

Press the On button to power on the device.

Step 7: Open Cartridge Door

Open the print cartridge door and ensure the carriage moves to the center; device must be on.

Step 8: Prepare Cartridges

Remove tape from cartridges, avoid touching contacts, and do not re-tape.

Step 9: Insert Cartridges

Insert tri-color and black cartridges into the correct slots, pushing firmly until they snap into place.

Step 10: Close Cartridge Door

Close the print cartridge door and wait for the alignment page to print automatically.

Step 11: Align Cartridges

Place printed alignment page face down on the scanner glass and close the lid.

Step 12: Complete Alignment

Press the Scan button to complete alignment; wait for the green On light to stop blinking.

Software Installation

Windows: Install Software from CD

Insert the green Windows CD, and double-click setup.exe if the startup screen does not appear.

Mac: Install Software from CD

Insert the Mac CD, double-click the Installer icon, and follow onscreen instructions.

Windows: Connect USB Cable

Once the USB prompt appears, connect the USB cable to the device and computer.

Mac: Connect USB Cable

Connect the USB cable to the device and then to any USB port on the computer.

Windows: Complete Software Installation

Follow the onscreen instructions to complete the software installation.

Mac: Complete Setup Assistant

Complete the Setup Assistant screen by following the onscreen instructions.

Troubleshooting Common Issues

Windows: USB Prompt Not Appearing

Cancel screens, remove and re-insert the Windows CD if the USB connection prompt doesn't appear.

Windows: Device Setup Failed

Unplug/replug device, check connections, avoid keyboard/non-powered hubs for USB.

Windows: Microsoft Add Hardware Screens

Cancel hardware screens, unplug USB, and re-insert the Windows CD to resolve.

Icons and Controls Explanation

Control Panel Button Functions

Explanation of On, Cancel, and Copy buttons and their functions.

Status Light Indicators

Meaning of paper check and cartridge check status lights.

Paper Type and Copy Options

Descriptions for plain paper, photo paper, and copy functions.

Scan and Start Copy Functions

Explanation of Scan and Start Copy (Black/Color) functions.