18
USB Step 6: Connect USB cable
1 Plug one end of the USB cable into the USB port on the
printer.
2 Plug the other end into any USB port on the computer.
USB Step 7: Install USB and printer software
Windows 98
1 After a few seconds, the Add New Hardware Wizard screen
appears.
2 Click Next.
2
1
Note: You can also refer to steps 8a through 8h on the
USB Cable Setup Quick Start Poster
Note: If the Add New Hardware Wizard screen does not
appear, your computer may not be USB-enabled. You can
still enjoy the full capabilities of your HP DeskJet 640C
Series printer by connecting the printer to the computer
with a parallel cable. Go to “Connecting your printer with
a parallel printer cable” on page 3 for setup instructions.
To Next Page
Loading...