5
3
Plug the other end into the computer and tighten the screws.
Step 3: Plug in the power cord
1
Leave the computer and the printer turned off.
2
Plug the power adapter cord firmly into the connector on
the back of the printer.
3
Plug the appropriate end of the power cord into the power
adapter.
4
Plug the other end of the power cord into an electrical
outlet.
2
4
3
Note: Always use the Power button on the front of the
printer to turn the printer on and off. Using a power strip,
surge protector or a wall outlet switch to turn the printer on
and off may cause premature failure.
To Next Page
Loading...