HP Digital Picture Frame
EN‐8
3. Pull out the back stand and adjust accordingly to the preferred
vi
ewing angle
It is recommended to place the Picture Frame horizontally, because this
direction provides the best viewing and operating experience.
By using the wall mount holes, you can hang the Picture Frame h
orizontally
or vertically on the wall.
Step 2: Connecting to power
1. Place the Picture Frame on a flat surface.
2. Connect the power adapter as below (1), and press the Po
wer
b
utton to turn on the Picture Frame (2)
Power systems and plug types may vary depending on your country/region.
T
o turn off the Picture Frame,
press the Power button
To Next Page
Loading...
