Removal and replacement procedures 34
3. Lower the processor module lever, and pull the module out of the server.
4. Release the latch, and open the cover to expose the processors.
To replace the component, reverse the removal procedure.
Removing a processor or processor blank
CAUTION: To prevent thermal instability and damage to the server, do not separate the
processor from the heatsink. The processor, heatsink, and retaining clip make up a single
assembly.
CAUTION: To prevent possible server malfunction and damage to the equipment, do not mix
single- and dual-core processors or processors with different speeds or cache sizes.
CAUTION: To prevent thermal damage, do not operate a server with dual-core processors
installed unless all processor sockets have either a processor or processor blank installed.
To Next Page
Loading...
