Server component identification 90
SATA or SAS drive numbers
The server supports eight SAS or SATA hot-plug hard drives. See "SAS and SATA hard drive guidelines
(on page 90)" for information about installing the hard drives.
SAS and SATA hard drive guidelines
When adding SAS or SATA hard drives to the server, observe the following general guidelines:
• The server supports eight SAS or SATA hot-plug hard drives.
• The system automatically sets all drive numbers.
• If only one hard drive is used, install it in the bay with the lowest number.
• Hard drives must be SFF types.
• Drives must be the same capacity to provide the greatest storage space efficiency when drives are
grouped together in the same drive array.
To Next Page
Loading...
