HP DreamColor Z24X

Level 1 Level 2 Level 3
Menu and Message Control Position Use the buttons to adjust the position of
the Menu. Press "Back" when you are
finished.
Opacity Set Opacity Value
Back
Timeout Set Timeout Value
Back
Configure Function Buttons Configure Function Button 1
Configure Function Button 2
Configure Function Button 3
Configure Function Button 4
Bezel Button Brightness Set Brightness Value
Back
Bezel Button Auto-Fade Enable (Obey Menu Timeout)
Disable (Always On)
Back
Back
Information Current Display Mode: Display Mode
Color Space: Color Space
Serial Number: Serial Number
Firmware Revision:
Firmware Revision IDs
Last Calibration: xxxxx Hours
Backlight Hours: xxxxx Hours
Back
Factory Reset
Using the On-Screen Display Menu 35