EasyManua.ls Logo

HP dx2280 - Microtower PC

HP dx2280 - Microtower PC
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Quick Specs
HP Compaq dx2280 Microtower Business PC
System Details
Rev 2.0 July 07
Over Voltage Protection
Over Current Protection
Short Circuit Protection
FCC ,UL approved
Power Conservation
‘Energy Saver‘
ACPI 2.0 support
Screen blanking
Hard drive 'Idle' mode
System Idle mode
Processor/Cache memory power-down (S3)
Values are subject to change without notification and are for reference only.
Performance of system, options, and ancillary equipment will vary depending on the system
configuration.
Levels presented do not account for non-HP/Compaq installed hardware.
Operating
50° to 113°F (10° to 45°C) at sea level with an
altitude de-rating of 1.0°C per every 1000 ft (300
m) above sea level to a maximum of 8000 ft
(2500 m), no direct sustained sunlight.
Maximum rate of change is 77°F/Hr (25°C/Hr).
The upper limit may be limited by the type and
number of options installed.
Ambient Air
Temperature
Storage
-22° to 140°F (-30° to 60°C)
Maximum rate of change: 410°F/Hr (210°C/Hr).
Operating
10% to 90% relative humidity (Rh), 86°F (30°C)
maximum wet bulb temperature, non-condensing
Humidity
Storage
5% to 95% relative humidity (Rh), 101.66°F
(38.7°C) maximum wet bulb temperature, non-
condensing
Operating
0 to 8,000 feet (0 to 2438.4 meters) This value
may be limited by the type and number of
options installed. Maximum allowable altitude
change rate is 1,000 ft/min (304.8 m/min).
Altitude
Non-Operating
0 to 30,000 feet (0 to 9,144 meters) Maximum
allowable altitude change rate is 1200 ft/min
(365.76 m/min).
Listed are the levels of shock the product can withstand with NO damage
being incurred? The values represent peak input acceleration during a 2~3
ms half-sine shock pulse, 11 ms trapezoidal shock pulse.
Shock
Non-Operating
40G's (Half-sine Shock)
40G's (Trapezoidal Shock)
Listed are the levels of vibration the product can withstand with NO damage
being incurred? The values represent a flat random vibration input
acceleration profile across the given frequency range.
Operating
Random vibration at 5Hz@0.00025G
2
/Hz,
10Hz@0.01G
2
/Hz, 100Hz@0.01G
2
/Hz,
300Hz@0.00001G
2
/Hz
5Hz to 300Hz, (0.25G's nominal).
System Environmental
Specs
Vibration
Non-Operating
Random vibration at 0.008G²/Hz,

Related product manuals