2–6 490778-001 Service Reference Guide
Setup Utilities and Diagnostics Features
Advanced
BIOS Features
F11 Prompt Allow you to enable or disable this feature.
Quick Power On Self Test Disables/enables the system to skip certain
tests while booting.
Enabling this feature decreases the time
required to boot the system.
POST Delay Time (seconds) Allows you to set a POST delay time to:
•0 Sec
•5 Sec
• 10 Sec
• 15 Sec
• 20 Sec
Removeable Device Priority Allow you to select FDD or USB-FDD as the
first removeable device.
Hard Disk Boot Priority Allows you to specify the order of attached
hard drive devices (such as USB HDD
storage, USB2 Drive Key, or USB flash
media, IDE HDD, SATA HDD or bootable
add-in cards). The first drive in the order has
priority in the boot sequence and is
recognized as drive C (if any devices are
attached).
CD-ROM Boot Priority Allows you to specify the order of attached
optical drive device.
Network Boot Priority Allows you to specify the order of network
device.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Allows you to specify which devices will boot
first, second, and third, or to disable any of
the three:
• Removable
• Hard Disk
•CD-ROM
•Network
•Disabled
✎
MS-DOS drive lettering assignments
may not apply after a non-MS-DOS
operating system has started.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
To Next Page
Loading...
Need help?
General