Computer Setup (F10) Utility Guide www.hp.com/in 7-8
Computer Setup (F10) Utility
Computer Setup (Continued)
Heading Option Description
!
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Power ACPI Function Enables/disables ACPI functions.
Management Changing this item can make the
Setup existing OS unusable.
ACPI Suspend Type •S3 (STR) (View only)
Restore On AC/Power Allows you to select system powerloss
behavior:
Loss •On
•Off
•Last State
Resume On PCI PME
Resume On PCIE PME
Disables/enables Resume by PME
Disables/enables Resume by PCIE PME
Wake On by Ring Disables/enables Resume on Ring.
Resume On Alarm
Disables/enables RTC alarm.
Date (of Month) Alarm
HPET Mode
If resume by Alarm is enabled ,allows you
to select day of the month for resumption
of RTC alarm.
High Precision Event Timers
• 32-bit Mode is for 32 bit OS
• 64-bit Mode is for 64 bit OS
Time (hh:mm:ss) Alarm If Resume by Alarm is enabled, allows
you to select what time the RTC alarm
will resume.
To Next Page
Loading...
