Computer Setup (F10) Utility Guide www.hp.com/in 7-9
Computer Setup (F10) Utility
Computer Setup (Continued)
Heading Option Description
!
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Hard Ware Reset Case Open Status Enabled/Disabled
Monitor
Setup
Case Opened (View Only)
CPU Temperature (View Only)
CPU Fan Speed (View Only)
System Temperature (View Only)
System Fan Speed (View Only)
CPU Fan Fault Detect Enabled/Disabled
System Fan Fault Detect Enabled /Disabled
Load Defaults Allows you to reset computer setup to
Setting Factory Defaults
Set Supervisor Allows you to establish a password to
Password control access to computer Setup
Set User Allows you to establish a password to
Password control access to computer
Save Setting and Allows you to save current settings and
Exit exit Computer Setup
Exit without Allows you to exit Computer setup
Saving without saving changes
To Next Page
Loading...
