Computer Setup (F10) Utility Guide www.hp.com 5
Computer Setup (F10) Utility
Standard
CMOS
Features
(continued)
IDE Channel 0 Master
IDE Channel 0 Slave
For each, allows you to:
• detect IDE HDD size and head on
selected channel
• set IDE on selected channel to:
•None
•Auto
•Manual
• set access mode on selected channel to:
•CHS
•LBA
•Large
•Auto
•view
•Capacity
•Cylinder
•Head
•Precomp
• Landing Zone
•Sector
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
To Next Page
Loading...
