HP Dx5150 - Compaq Business Desktop - Onboard Parallel Port; Parallel Port Mode; ECP Mode Use DMA

Computer Setup (F10) Utility Guide www.hp.com 11
Computer Setup (F10) Utility
Integrated
Peripherals
(continued)
Onboard Parallel Port Allows you to select setting for onboard
parallel port:
•Disabled
•378/IRQ7
•278/IRQ5
•3BC/IRQ7
Parallel Port Mode Allows you to select parallel port mode:
• Standard
•SPP
•EPP1.7
•EPP1.9
•ECP
•ECP+EPP
ECP Mode Use DMA If Parallel Port Mode is set to ECP or
ECP+EPP, allows you to set the ECP Mode
Use DMA to 1 or 3.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.