HP dx5150 Specification

Memory Controller is integrated in the Processor (Supports DDR I type memories up to PC3200 (400 Mhz)
Memory Controller is integrated in the Processor (Supports DDR I type memories up to PC3200 (400 Mhz)Memory Controller is integrated in the Processor (Supports DDR I type memories up to PC3200 (400 Mhz)
Memory Controller is integrated in the Processor (Supports DDR I type memories up to PC3200 (400 Mhz)
DDR SYNCH DRAM DIMM NON-ECC MEMORY
DDR SYNCH DRAM DIMM NON-ECC MEMORYDDR SYNCH DRAM DIMM NON-ECC MEMORY
DDR SYNCH DRAM DIMM NON-ECC MEMORY
The HP business desktop dx5150 PC has four memory DIMM slots and supports dual channel memory configurations. It is required
to add memory in pairs; memory should be added in pairs and should be the same type. For example, 2x128-MB memory modules
will perform better on some applications than 1x256-MB memory module because of the dual channel memory support on the
dx5150.
STANDARD MEMORY
STANDARD MEMORYSTANDARD MEMORY
STANDARD MEMORY
Configurations can be selected with a 256-MB, 512-MB, 1024-MB, or 2048-MB memory. Memory types supported include
PC3200 (DDR 400)
Various combinations of single-DIMM (for future upgradeability) and double-DIMM (for enhanced dual-channel memory
performance) will be offered. There are four DIMM slots available. 2 Of them are black, and two of them are blue to indicate the
two different channels. For best performance populate the DIMMs in pairs (Make sure to use identical memory DIMMs). Also, if only
Two single sided matched pairs are used place them in the Black Slots. Refer to the dx5150 service guide or the Hardware reference
guide for supported memory configurations.
QuickSpecs
HP dx5150 Business PC
HP dx5150 Business PCHP dx5150 Business PC
HP dx5150 Business PC
Memory
DA - 12105 Worldwide — Version 7 — August 23, 2005 Page 16

HP dx5150 Specifications

General

Brand	HP
Model	dx5150
Category	Desktop
Language	English