HP dx5150 - Acoustics and Operating Environment

Acoustics: Advanced Power
Management - On
Seated operator position Idle (Hard
drive spinning
but not
seeking) =
29dBA
Idle (Hard
drive spinning
but not
seeking) =
29dBA
Unit Environment and
Operating Conditions
Description Microtower Small Form
Factor
Shock
Operating
(*Using 11-ms half-
sine shock pulse)
6 faces,11 ms, 1/2 Sine, 10 shocks per face,5G during Read, 1G during Write
(with no damage being incurred)
Yes Yes
Non-Operating
(*Using 11-ms half-
sine shock pulse)
6 faces,2 ms < pulse duration < 3 ms
(with no damage being incurred)
Yes Yes
Vibration
Operating Random vibration at 10Hz to 500Hz, (0.25G's nominal) Yes Yes
Non-Operating Random vibration at 10Hz to 500Hz, (0.5G's nominal) Yes Yes
Relative Humidity
Operating
(maximum wet bulb
temp., non-
condensing)
10°C - 35°C; 10% - 90% non condensing. Yes Yes
Non-operating
(maximum wet bulb
temp., non-
condensing)
-30°C -90°C ;10%~95% R.H. non condensing. Yes Yes
Altitude Max (un-pressurized)
Operating
(Maximum allowable
altitude change rate is
1500 ft/min.)
0 to 3,048 meters/10,000 feet - This value may be limited by the type and
number of options installed.
Yes Yes
Non-operating
(Maximum allowable
altitude change rate is
1500 ft/min.)
0 to 9144meters/30,000 feet - This value may be limited by the type and
number of options installed.
Yes Yes
QuickSpecs
HP dx5150 Business PC
Technical Specifications
DA - 12105 North America — Version 26 — July 10, 2007 Page 23