EasyManuals Logo

HP dx7400 - Microtower PC Utility Guide

HP dx7400 - Microtower PC
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 1-3 Computer Setup—Main
Option Description
Date (mm:dd:yy) Allows you to set system date.
Time (hh:mm:ss) Allows you to set system time.
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
For each, allows you to:
run HDD self-test for selected channel:
SMART Status Check
HDD Short Self-Test
HDD Extended Self-Test
auto-detect HDD size and head
set IDE drive on selected channel to:
None
Auto
set access mode on selected channel to:
Large
Auto
view:
Firmware
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Onboard FDC Controller Disables/enables the floppy disk controller.
Drive A Allows you to set Drive A to:
None
1.44M, 3.5 in.
4 Chapter 1 Computer Setup (F10) Utilities ENWW

Other manuals for HP dx7400 - Microtower PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP dx7400 - Microtower PC and is the answer not in the manual?

HP dx7400 - Microtower PC Specifications

General IconGeneral
MemoryUp to 8 GB DDR2 SDRAM
AudioIntegrated High Definition Audio
Power Supply300W
ProcessorIntel Core 2 Duo, Pentium Dual-Core, or Celeron
StorageSATA Hard Drive
Optical DriveDVD-ROM, DVD+/-RW
GraphicsIntegrated Intel Graphics Media Accelerator 3100
NetworkingIntegrated Gigabit Ethernet
Expansion Slots1 PCI Express x16
Ports1 serial, 1 parallel, audio in/out
Operating SystemWindows XP Professional

Related product manuals