After AC Power Loss Allows you to select system power loss behavior:
●
On
●
Off
●
Last State
Wake on PCI Device
from S5
Disables/enables waking up from S5 by PCI device.
RTC Alarm Resume Disables/enables RTC (real-time clock) alarm.
Date (of Month) If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC
alarm. (Set to 0 for every day.)
Resume Time
(hh:mm:ss)
If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume.
Table 1-4 Computer Setup—Advanced (continued)
ENWW Computer Setup—Advanced 7
To Next Page
Loading...
