14. If it is necessary to replace the display hinge cover and/or hinges, rotate top of hinge cover away from
display enclosure to disengage the tabs (1), and then pull the cover o the enclosure (2).
The display hinge cover for non-privacy displays is available in the Hinge Kit for touch displays using
spare part number L17975-001. The display hinge cover for non-touch displays is available using spare
part number L13683-001.
15. If it is necessary to replace the display hinges, remove the three Phillips M2.5×10.0 screws that secure
each hinge (1), and then remove the hinges from the display enclosure (2).
Display hinges for touch displays are available in the Hinge Kit using spare part number L17975-001.
Display hinges for non-touch displays are available using spare part number L13683-001.
78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
