EasyManua.ls Logo

HP EliteBook 850 G2 - Page 39

HP EliteBook 850 G2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
QuickSpecs
HP EliteBook 850 G2 Notebook PC
Technical Specifications
c04472797 DA 15135 World Wide Version 9 May 26, 2016
Page 39
Dimensions (L x W x H)
0.41x 0.08 x 0.32 in (10.5 x 2 x 8.2 mm)
Smart Card support
ISO 7816 Class A and AB smart cards
Smart Card Interface
Smart Card Interface with T = 0 and T = 1 support
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via
external EEPROM
Operating systems
No driver is required for this device. Native support is provided by the
operating system.
Power
Normal Mode
With card present, before being suspended: 40.9 mA
Without card present, before being suspended:
33.16 mA
After being suspended with smart card present: 380
μA
After being suspended without smart card present:
380 μA
Power Saving
Mode
With card present, before being suspended: 40.6 mA
Without card present: 380 μA
After being suspended with smart card present: 380
μA
Features
Support single slot
Support T0, T1 protocol
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442,
SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041
card via external EEPROM
Support ISO7816 Class A, B and C (5V/3V/1.8V) card
Implemented as an USB full speed device with bulk transfer
endpoint, Mass
Storage endpoint
Built-in PLL for USB and Smart Card clocks requirement
Support EEPROM for USB descriptors customization (PID/VID/
iManufacturer/iProduct/Serial Number), Direct Web Page Link, and
accessing memory card module.
EEPROM programmable via USB interface
Support software update for memory card module
Support Direct Web Page Link via configuration in external EEPROM
Support short APDU and extended APDU
Compatible with Microsoft USB-CCID driver
Support remote wake up through inserting card/removing card
Support USB selective suspend
Support Power Saving Mode (Using one pin to select between
Normal/PWR Saving Mode)
Support card power over current protection mechanism
Built in resonator.
Support USB LPM (Link Power Management) features.
Embedded clock source.

Related product manuals