To Next Page

To Previous Page

5. Connect one end of the power cord to the AC power connector on the back of the monitor, and

the other end to an electrical wall outlet.

WARNING! To reduce the risk of electric shock or damage to the equipment:

Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

Disconnect power from the equipment by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one

may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from

the electrical outlet, grasp the cord by the plug.

6. Secure the cables in place with the cable management clip. Press the clip straight down on the

curved neck of the pedestal ensuring that the tabs on the sides of the clip snap into the slots on

the pedestal.

6 Chapter 2 Setting Up the Monitor

Questions and Answers:

Need help?

Do you have a question about the HP EliteDisplay E190i and is the answer not in the manual?

HP EliteDisplay E190i Specifications

General

Pixel pitch	0.2928 x 0.2928 mm
Response time	8 ms
Display diagonal	18.9 \
Display resolution	1280 x 1024 pixels
Display technology	LED
Contrast ratio (dynamic)	3000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
Display brightness (typical)	250 cd/m²
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3
Product color	Silver
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions