To Next Page

To Previous Page

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Remove the cable management clip from the pedestal by pulling outward on the two sides of the

clip (1) then lifting the clip off the pedestal (2).

3. Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable.

NOTE: The monitor is capable of supporting either analog or digital input. The video mode is

determined by the video cable used. The monitor will automatically determine which inputs have

valid video signals. The inputs can be selected by pressing the Input button on the front panel or

through the On-Screen Display (OSD) feature by pressing the Menu button.

●

For analog operation, connect the VGA signal cable to the VGA connector on the rear of

the monitor and the other end to the VGA connector on the computer (cable provided).

●

For DVI digital operation, connect the DVI-D signal cable to the DVI connector on the rear

of the monitor and the other end to the DVI connector on the computer (cable provided).

● For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort

connector on the rear of the monitor and the other end to the DisplayPort connector on the

computer (cable is optional in some countries).

4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the

computer, and the other end to the upstream USB connector on the monitor.

Connecting the Cables 5

Questions and Answers:

Need help?

Do you have a question about the HP EliteDisplay E190i and is the answer not in the manual?

HP EliteDisplay E190i Specifications

General

Pixel pitch	0.2928 x 0.2928 mm
Response time	8 ms
Display diagonal	18.9 \
Display resolution	1280 x 1024 pixels
Display technology	LED
Contrast ratio (dynamic)	3000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
Display brightness (typical)	250 cd/m²
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3
Product color	Silver
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions