HP EliteDisplay E190i User Manual

2 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Attaching the Stand to the Monitor
1. Lift the monitor from its box and place it face down on a flat surface.
2. Attach the base to the stand.
3. Tighten the screw on the bottom of the stand by hand.
Attaching the Stand to the Monitor 3

HP EliteDisplay E190i Specifications

General

Pixel pitch	0.2928 x 0.2928 mm
Response time	8 ms
Display diagonal	18.9 \
Display resolution	1280 x 1024 pixels
Display technology	LED
Contrast ratio (dynamic)	3000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
Display brightness (typical)	250 cd/m²
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3
Product color	Silver
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions

Depth (with stand)	192 mm
Height (with stand)	486 mm
Depth (without stand)	47 mm
Width (without stand)	417 mm
Height (without stand)	347 mm
Weight (without stand)	4900 g