HP EliteDisplay E243d 23.8 User Manual

IMPORTANT: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface.
Never spray the cleaner directly on the screen surface. It can run behind the bezel and damage the
electronics. The cloth should be moist, but not wet. Water dripping into the ventilation openings or other
points of entry can cause damage to the monitor. Allow the monitor to air-dry before use.
5. After you remove the dirt and debris, you can also clean the surfaces with a disinfectant. The World
Health Organization (WHO) recommends cleaning surfaces, followed by disinfection, as a best practice
for preventing the spread of viral respiratory illnesses and harmful bacteria. A disinfectant that is within
HP’s cleaning guidelines is an alcohol solution consisting of 70% isopropyl alcohol and 30% water. This
solution is also known as rubbing alcohol and is sold in most stores.
Shipping the monitor
Keep the original packing box in a storage area. You might need it later if you ship the monitor or move.
Maintenance guidelines 33

HP EliteDisplay E243d 23.8 Specifications

General

Display Size	23.8 inches
Resolution	1920 x 1080
Panel Type	IPS
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Color Support	16.7 million colors
VESA Mount	100 x 100 mm
Refresh Rate	60 Hz
Response Time	5ms (gray to gray)
Ports	1 x DisplayPort, 1 x HDMI, 1 x USB-C, 4 x USB 3.0
Viewing Angle	178° horizontal, 178° vertical
Built-in Devices	USB hub
Power Consumption	65 W (maximum)
Integrated Speakers	Yes
Height adjustment	Yes