HP EliteDisplay S230tm User Manual

●
For DVI digital operation, connect the DVI-D signal cable to the DVI connector on the rear
of the monitor and the other end to the DVI connector on your input device (cable
provided).
4. Connect one end of the provided USB cable to a USB connector on the rear panel of the
computer, and the other end to the USB connector on the monitor.
NOTE: You must connect the USB cable between the computer and monitor for webcam and
touch functionality.
Connecting the cables 5

HP EliteDisplay S230tm Specifications

General

Pixel pitch	0.265 x 0.265 mm
Aspect ratio	16:9
Screen shape	Flat
Display diagonal	23 \
Touch technology	Multi-touch
Touchscreen type	Tabletop
Display brightness	220 cd/m²
Vertical scan range	50 - 76 Hz
Horizontal scan range	24 - 94 kHz
Touchscreen technology	Optical imaging
Contrast ratio (typical)	1000:1
Display diagonal (metric)	58.42 cm
Product color	Black, Silver
Country of origin	China
Dimensions (W x D x H) with stand	599.3 x 69.5 x 409.2 mm
DVI-D ports quantity	1
Tilt angle range	15 - 70 °
Panel mounting interface	100 x 100 mm
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
OmniTapps Multitouch compatibility	No
RMS rated power	2 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	69.5 mm
Width (with stand)	599.3 mm
Height (with stand)	409.2 mm
Weight (with stand)	6500 g
Depth (without stand)	40.5 mm
Weight (without stand)	5500 g