13
2.5 Initial Settings
2.5.1 Set the Date and Time
To set the correct date and time, do the following:
1. Press the button
to enter the OSD menu.
2. Press the
or
button to select Date / Time and
press the button.
3. Press the
or
button to adjust the value and
press the button to
move to another field.
4. Repeat step 3 until the date and time setting is complete.
5. Press the button to exit the Date/Time settings. Press the
button again to exit the settings menu and return to the live
view mode.
Note:
When the battery is depleted, you must reset the date/time before the function
-automatic record is started.
To Next Page
