34
Step Command Remarks
6. (Optional.) Configure filtering
of advertised routes.
ipv6 filter-policy
acl6-number
export
[ protocol [ process-id ] ]
By default, IPv6 IS-IS does not
filter advertised routes.
7. Return to system view.
quit
N/A
8. Enter interface view.
interface
interface-type
interface-number
N/A
9. Enable the IPv6 IS-IS
process on the interface.
isis ipv6 enable
[ process-id ]
By default, IPv6 IS-IS is disabled
on an interface.
Configuring EBGP between an MCE and a PE
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view.
bgp
as-number N/A
3. Enter BGP-VPN instance
view.
ip vpn-instance
vpn-instance-name
N/A
4. Configure the PE as an
EBGP peer.
peer
{ group-name | ipv6-address
[ prefix-length ] }
as-number
as-number
By default, no BGP peer is
configured.
5. Enter BGP-VPN IPv6 unicast
address family view.
address-family ipv6
[
unicast
]
N/A
6. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
peer
{ group-name | ipv6-address
[ prefix-length ] }
enable
By default, BGP does not
exchange IPv6 unicast routes with
any peer.
7. Redistribute VPN routes.
import-route
protocol
[ process-id [
med
med-value ] ]
By default, no routes are
redistributed into BGP.
8. (Optional.) Configure filtering
of advertised routes.
filter-policy
acl6-number
export
[ protocol process-id ]
By default, BGP does not filter
advertised routes.
9. (Optional.) Configure filtering
of received routes.
filter-policy
acl6-number
import
By default, BGP does not filter
received routes.
Configuring IBGP between an MCE and a PE
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view.
bgp
as-number N/A
3. Enter BGP-VPN
instance view.
ip vpn-instance
vpn-instance-name
N/A
4. Configure the PE as an
IBGP peer.
peer
{ group-name | ipv6-address
[ prefix-length ] }
as-number
as-number
N/A
5. Enter BGP-VPN IPv6
unicast address family
view.
address-family ipv6
[
unicast
]
N/A
6. Enable BGP to
exchange IPv6 unicast
routes with the peer.
peer
{ group-name | ipv6-address
[ prefix-length ] }
enable
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
7. Redistribute the VPN
routes of the VPN site.
import-route
protocol [ process-id [
med
med-value ] ]
By default, no routes are
redistributed into BGP.
To Next Page
Loading...
Need help?
General
