HP J8692A Specification

HP 1m Multi-mode OM3 LC/LC FC Cable AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl QK737A
Switch Enclosure Options
Rack Mount kits
HP X410 1U Univ 4-post Rack Mnt Kit J9583A
See Configuration Note:1,
2
Rack Shelf AB469A
See Configuration Note:3
Configuration Rules:
Note 1 Default with switch.
Note 2 If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Rack in the EMEA region. The Rack Mount kit
must be ordered as BTO using supplier 8OCZ."
Note 3 This has existing rules that say 1 per 20 if 1U and 1 per 10 if its 3U or more. This rule is fine for ProCurve.
NOTE: Both parts above are required to ship the 62xx Series Switches installed in a rack. Exceptions- The
Shelf Kit (AB469A) may be removed if the Switch is supported underneath by a full depth Server of 3U height
or greater mounted on fixed rails
Software
HP 3500 yl Premium License J8993A
External Power supplies
HP 620 Redundant/External Power Supply J8696A
Height = 1U
QuickSpecs
HP 3500 and 3500 yl Switch Series
Configuration
DA - 13282 Worldwide — Version 19 — December 9, 2013 Page 14

HP J8692A Specifications

General

Brand	HP
Model	J8692A
Category	Switch
Language	English