Need help?Do you have a question about the HP J9983A and is the answer not in the manual?
Steps to physically connect the switch to a network for management access.
Configures network interface settings like IP address, subnet mask, and gateway.
Displays and configures port status, settings, and basic statistics for network interfaces.
Configures STP to prevent network loops and ensure optimal data paths.
Detects and automatically prevents network loops to maintain network stability.
Covers viewing VLAN status, adding, and modifying VLAN configurations.
Assigns ports to VLANs and configures participation and tagging settings.
Manages per-port PoE enablement, priority, power modes, and detection types.
Enables HTTPS management with SSL certificates for secure communication.
Manages user password for accessing the switch configuration utility.
To Next Page
General
