Need help?Do you have a question about the HP J9146A - ProCurve Switch 2910al-24G-PoE and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Product Name | ProCurve Switch 2910al-24G-PoE |
| Model Number | J9146A |
| Power over Ethernet (PoE) | Yes |
| PoE Budget | 370W |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| Form Factor | Rack-mountable |
| Power Supply | Internal |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Routing Protocol | Static IP routing |
| Management | Web, CLI, SNMP |
| Layer | Layer 3 |
| Operating Humidity | 15% to 95% non-condensing |
| Standards Compliance | IEEE 802.3, 802.3u, 802.3ab |
| Ports | 24 x 10/100/1000Base-T |
Describes the front panel components, ports, and LEDs of the switch.
Details the rear panel ports, connectors, and expansion module slots.
Explains the available expansion modules and their connectivity options.
Highlights the key features and capabilities of the ProCurve 2910al switches.
Lists the components provided in the switch package.
Provides critical safety and environmental guidelines for installing the switch.
Outlines the main steps involved in installing the switch.
Details the methods for physically installing the switch in various locations.
Guides on properly connecting the switch to an AC power source.
Explains how to establish a console connection for initial configuration and management.
Provides instructions on connecting network cables to the switch ports.
Outlines the essential initial configuration steps for network management.
Details how to use the console setup screen for basic switch configuration.
Explains how to manage the switch remotely using its IP address.
Offers fundamental advice for resolving common switch issues and problems.
Explains how to interpret switch LED patterns for problem identification.
Describes tests to verify the switch's hardware and operating code functionality.
Guides on resetting the switch to its original factory default settings.
Lists physical dimensions, weight, and mounting options for the switches.
Details electrical specifications such as voltage, current, and frequency.
Lists operating and non-operating temperature, humidity, and altitude limits.
Outlines the safety compliance standards the switches adhere to.
Provides physical dimensions and weight for the expansion modules.
Details environmental operating and non-operating conditions for modules.
Specifies types of network cables and their compatibility with the switch.
Lists supported distances for various network technologies and cable types.
Covers general safety precautions, grounding, and servicing information.
Details compliance with Electromagnetic Compatibility (EMC) regulations for various regions.
Provides information on proper disposal and recycling of electronic waste.
To Next Page