Need help?Do you have a question about the HP J9981A and is the answer not in the manual?
General| Management | Managed |
|---|---|
| PoE | No |
| Jumbo Frame Support | Yes |
| Form Factor | Rack-mountable |
| Model | J9981A |
| Layer | Layer 2 |
| Weight | 2.5 kg |
| MAC Address Table Size | 16, 000 entries |
| Power Supply | Internal |
| Operating Temperature | 0°C to 40°C |
| Ports | 24 x 10/100/1000BASE-T ports 4 x SFP+ ports |
| Humidity | 15% to 95% non-condensing |
Explains how to connect the switch to a network for remote management.
Details how to configure the switch's network interface settings.
Allows viewing port status and configuring port settings.
Configures traffic mirroring to monitor network traffic.
Explains Spanning Tree Protocol for preventing network loops.
Configures global STP settings and views interface status.
Allows configuring specific Spanning Tree settings for individual ports.
Provides an automatic feature to detect and prevent network loops.
Displays current VLANs and allows adding/editing VLAN information.
Assigns switch ports and trunks to VLANs and configures tagging.
Allows viewing and editing trunk configurations.
Configures global PoE settings like power management mode.
Enables/disables PoE on ports and configures port priority and power settings.
Configures built-in security features like Storm Control and DoS protection.
Enables secure HTTP (HTTPS) management sessions using SSL.
Performs a software reboot of the switch.
Restores all switch settings to their factory default values.
Manages switch image and configuration file backups and updates.
To Next Page
