To Next PageTo Next Page
Need help?Do you have a question about the HP J9729A and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| Jumbo Frame Support | Yes |
| Power over Ethernet (PoE) | No |
| Power Supply | Internal |
| Model | HP J9729A |
| Uplink Ports | 4 x SFP+ |
| MAC Address Table Size | 16384 entries |
| Management | Web, CLI, SNMP |
| Form Factor | Rack-mountable |
| Ports | 48 x 10/100/1000 ports |
Describes IGMP's role in reducing bandwidth usage and configuring it with the switch.
Explains how IGMP manages multicast traffic and its benefits for multimedia applications.
Explains IGMP messages, group management, and operation modes.
Propagates IGMP joins across router boundaries for multicast traffic.
Introduces IGMP v2 NG and its existing and new features.
Provides context commands and specific configurations like querier and filters.
Lists the switch's IP routing capabilities including static routes and RIP.
Describes IP interfaces, ARP cache, IP route table, and forwarding cache.
Lists global IP parameters like ARP, TTL, and IRDP settings.
Explains the ARP process for MAC address acquisition and cache management.
Creates static routes for network traffic management.
Details how to configure static IP routes, including null routes.
Allows multiple equal-cost paths for routes to the same destination.
Introduces DHCP relay functionality for IP address configuration.
Introduces DHCP Option 82 and its server support requirements.
Command to configure DHCP Option 82 with various options.
