HP J8693A Specification

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height
See Configuration Note:1,
2
PDU Cable NA/MEX/TW/JP J9311A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9311A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules:
Note 1 The following Transceivers install into this Switch:
HP X111 100M SFP LC FX Transceiver J9054C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC SX Transceiver J4858C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
Note 2 Localization required on orders without #B2B or #B2C options.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
Factory Racked Models
HP 3500-48G-PoE+ yl Switch J9311A
44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height
See Configuration Note:1,
2
PDU Cable NA/MEX/TW/JP J9311A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9311A#B2C
QuickSpecs
HP 3500 and 3500 yl Switch Series
Configuration
DA - 13282 Worldwide — Version 19 — December 9, 2013 Page 9

HP J8693A Specifications

General

Brand	HP
Model	J8693A
Category	Switch
Language	English