What to do if HP J9148A cables are faulty or loose?
If you're experiencing issues with your HP Switch, start by checking the cables. Ensure they are firmly connected at both ends. If the connections seem fine, try swapping the cable with a different one to rule out a faulty cable.
What to do if HP J9148A Switch uses non-standard cables?
Non-standard or miswired cables can lead to network issues with your HP Switch. Replace the existing cable with a correctly wired one. You can also compare your cable to the cable in appendix B, 'Cables and Connectors' for pinouts and correct cable wiring.
Visual guide to front panel components like ports, LEDs, and buttons.
Details switch port types (RJ-45, dual-personality, expansion) for network connections.
Explains the meaning and behavior of all switch LEDs for status indication.
Lists package contents and essential safety/environmental installation guidelines.
Step-by-step guide for physical mounting and connecting power and network cables.
Guide for initial IP, subnet, password setup via console.
Instructions for managing the switch via Telnet or web browser.
Common issues, initial steps, and interpreting LED patterns for problem diagnosis.
Procedures for testing switch hardware and restoring factory defaults.
Technical details including dimensions, power, environment, and noise.
Specs for expansion modules, cable types, and distances.
General safety warnings, grounding, and servicing guidelines.
Compliance statements and waste disposal guidelines.
To Next Page
General
